Terms of Reference (ToR) and Rulemaking Group Composition (RMG)

Approval requirements for Air-Ground Data Link and Surveillance systems in support of Interoperability requirements

Additional airworthiness specifications for operations: Type III Emergency exit access and ease of operation

AMC Revision 2012 (External Loads Sub-group)

Incorporation of generic SC and AMC CRIs in CS-25

Extension of the EASA system to safety regulation of Air Traffic Management (ATM) and Air Navigation Services (ANS)

Certification Specifications for Free Gas Balloons and Tethered Gas Balloons.

Additional airworthiness specifications for operations: Seat crashworthiness improvement on Large Aeroplanes - Dynamic testing 16g

Additional airworthiness specifications for operations: Fire hazard in Class D cargo compartments

Extension of EASA system to safety regulation of Air Traffic Management (ATM) and Air Navigation Services (ANS) – development of Implementing Rules (ATM.004(a)) and Acceptable Means of Compliance and Guidance Material (ATM.004(b)) on competent authorities

Extension of the EASA system to safety regulation of Air Traffic Management (ATM) and Air Navigation Services (ANS) – development of Implementing Rules (ATM.003(a)) and Acceptable Means of Compliance and Guidance Material (ATM.003(b)) on Air Traffic Contr

Additional airworthiness specifications for operations – Transfer of JAR-26 provisions into the EU framework

Permit to Fly: Issue by the Agency/DOA privileges to approve flight conditions

Large Aeroplane Certification Specifications in Supercooled Large Drop, Mixed phase, and Ice Crystal Icing Conditions

Implementation of CAEP/8 amendments

Implementing measures for the safety of aerodromes - Requirements for aerodrome operator organisations and competent authorities

Implementing measures for the safety of aerodromes - Requirements for aerodrome design

Implementing measures for the safety of aerodrome operations and safe aircraft operations at aerodromes - Requirements for aerodrome operations

Alignment of Regulation No (EC) 2042/2003 with Regulation (EC) No 216/2008 and with ICAO Annex 6 requirement for human factor principles to be observed in the design and application of the aircraft maintenance programme

Improvement of GM 21A.101

Flight testing

Airworthiness Directives (ADs)

Replacement parts

Updating of Flight and Duty Time Limitations and rest requirements for commercial air transport (CAT) with aeroplanes taking into account recent scientific and technical evidence

Control of contracted maintenance personnel

Fuel System Low Level Indication/Fuel Exhaustion

Introduction of TCAS II software Version 7.1

ETSO C16 update

Activation of ice protection system

Amendments to the AMC material to Part-M, additional text to AMC M.A.706 (e)(2): Change AMC M.A. 706 (e) (2).

Non binding guidance on TBO intervals

Passenger Emergency Exits, emergency features and escape routes - Harmonisation with FAA

De-icing/Anti-icing AMC and GM following A-NPA 2007-11

Appendix I “Aircraft Type Ratings for Part-66 Aircraft Maintenance License” to Annex IV “Acceptable Means of Compliance to Part-66” of ED Decision 2003/19/RM

Review of Commission Regulation (EC) No 2042/2003; Definition of Critical Systems (for maintenance purpose)

Security related design standards

Updating of ETSO-C119b – Traffic Alert and Collision Avoidance System (TCAS) Airborne Equipment, TCAS II

Protection from debris impacts

Miscellaneous improvement to AMC­20

Ice Protection

Qualifications for flying in Instrument Meteorological Conditions

Yawing Conditions

Amendment to Decision 2003/19/RM (AMC to Part 145) to adapt them to the process of granting Part­145 approvals to maintenance organisations located outside the territories of the Member States.

Update of EASA AMC to harmonise with corresponding revision to FAA Advisory Circular 20­107A.

Fuel tank flammability reduction

Restricted Certificates of Airworthiness

Fuel tank safety training issues – AMC/GM

Avionics

Part 21 Other party supplier control

Possibility for “exemption” from the applicable airworthiness code and “elect to comply” for TCs, STCs and changes to TCs

Article 6(1) of the Basic Regulation and CS-36