Skip to main content
Home
EASA
Easy Access Rules Additional Airworthiness Specifications

You are here

  • Home
  • Document Library
  • Publications
  • Technical publications - Easy Access Rules
  • Easy Access Rules for Additional Airworthiness Specifications (Regulation (EU) 2015/640)

Easy Access Rules for Additional Airworthiness Specifications (Regulation (EU) 2015/640)

Revision from March 2023
31 Mar 2023
Last updated date
31 March 2023
Feedback

Easy Access Rules for Additional Airworthiness Specifications (Regulation (EU) 2015/640)

Revision from March 2023

Filters

Table of contents

  • Disclaimer
  • Note from the editor
  • Cover regulation article
  • Point/Appendix (annex to the regulation)
  • Certification specification
  • Guidance material
  • Incorporated amendments
  • Cover Regulation
  • Article 1 Subject matter and scope
  • Article 2 Definitions
  • Article 3 Additional airworthiness specifications for a given type of operation
  • Article 4 Amendment to Regulation (EU) 965/2012
  • Article 5 Transitional provisions
  • Article 6 Entry into force and application
  • Annex I (Part-26)
    • SUBPART A — GENERAL PROVISIONS
      • CS 26.1 Purpose and scope
        • GM1 26.1  JAR-26 / JAR/CS-25 / FAR-25+121 / OPS / Part-26 / CS-26 / GM-26 cross-reference table
        • GM2 26.1 Demonstration of compliance
      • 26.10 Competent authority
      • 26.20 Temporary inoperative equipment
      • 26.30 Demonstration of compliance
    • SUBPART B — LARGE AEROPLANES
      • 26.50 Seats, berths, safety belts, and harnesses
        • CS 26.50 Seats, berths, safety belts, and harnesses
          • GM1 26.50(c) Cabin crew seat location with respect to injury risk
      • 26.60 Emergency landing – dynamic conditions
        • CS 26.60 Emergency landing – dynamic conditions
          • GM1 26.60 Emergency landing – dynamic conditions
      • 26.100 Location of emergency exits
        • CS 26.100 Location of emergency exits
      • 26.105 Emergency exit access
        • CS 26.105 Emergency exit access
      • 26.110 Emergency exit markings
        • CS 26.110 Emergency exit markings
          • GM1 26.110(d) Universal symbolic exit signs
          • GM1 26.110(e)(4) Emergency Exit Markings
      • 26.120 Interior emergency lighting and emergency light operation
        • CS 26.120 Interior emergency lighting and emergency light operation
      • 26.150 Compartment interiors
        • CS 26.150 Compartment interiors
          • GM1 26.150(a) Compartment interiors
          • GM1 26.150(c) Compartment interiors
          • GM1 26.150(d) Compartment interiors
      • 26.155 Flammability of cargo compartment liners
        • CS 26.155 Flammability of cargo compartment liners
      • 26.156 Thermal or acoustic insulation materials
        • CS 26.156 Thermal/acoustic insulation materials
          • GM1 26.156(a) Insulation materials installed as replacement
      • 26.157 Conversion of Class D compartments
        • CS 26.157 Conversion of Class D compartments
      • 26.160 Lavatory fire protection
        • CS 26.160 Lavatory fire protection
      • 26.170 Fire extinguishers
        • CS 26.170 Fire extinguishers
          • GM1 26.170(b) Fire extinguishers
      • 26.200 Landing gear aural warning
        • CS 26.200 Landing gear aural warning
      • 26.201 Tyre inflation pressure
        • CS 26.201 Tyre inflation pressure
      • 26.205 Runway overrun awareness and alerting systems
        • CS 26.205 Runway overrun awareness and alerting systems
          • GM1 26.205 Runway overrun awareness and alerting systems
      • 26.250 Flight crew compartment door operating systems — single incapacitation
      • 26.300 Continuing structural integrity programme for ageing aeroplanes structures — general requirements
        • CS 26.300(c), 26.330(c) and (d) Substantiation of change and repair status
          • GM1 26.300(b) and 26.330(b) Guidance on applicability
          • GM1 26.300(c) and 26.330(c) Substantiation of change and repair status
      • 26.301 Compliance Plan for (R)TC holders
        • CS 26.301 Compliance plan for (R)TC holders and applicants
      • 26.302 Fatigue and damage tolerance evaluation
        • CS 26.302 Fatigue and damage tolerance evaluation
      • 26.303 Limit of Validity
        • CS 26.303(a) and (c) Limit of validity
          • GM1 26.303(a) Derogation from point (a)(ii)
      • 26.304 Corrosion prevention and control programme
        • CS 26.304(a) CPCP
      • 26.305 Validity of the continuing structural integrity programme
        • CS 26.305(a) and (c) Validity of the continuing structural integrity programme
      • 26.306 Fatigue critical baseline structure
        • CS 26.306(a) and (d) Fatigue-critical baseline structure
      • 26.307 Damage tolerance data for existing changes to fatigue-critical structure
        • CS 26.307(a)(i),(ii) and (b) List of fatigue-critical modified structure
        • CS 26.307(a)(iii) and (c) Damage tolerance data for existing changes to the FCS
      • 26.308 Damage tolerance data for existing repairs to fatigue-critical structure
        • CS 26.308 Damage tolerance data for existing published repairs to fatigue-critical structure
      • 26.309 Repair evaluation guidelines
        • CS 26.309 Repair evaluation guidelines
      • 26.330 Damage tolerance data for existing supplemental type-certificates (STCs), other existing major changes and existing repairs affecting those changes or STCs
      • 26.331 Compliance Plan for STC holders
        • CS 26.331 Compliance plan for STC holders
      • 26.332 Identification of changes affecting fatigue critical structure
        • CS 26.332 Identification of changes affecting fatigue-critical structure
          • GM1 26.332(a)(iii) Identification of published repairs to changes affecting fatigue-critical structure
          • GM1 26.332(c)(ii) and 26.334 FCMS and DTE for STCs and other changes approved prior to 1 September 2003
      • 26.333 Damage tolerance data for STCs and repairs to those STCs approved on or after 1 September 2003
        • CS 26.333 and 26.334 Damage tolerance data for STCs, other changes and repairs to those STCs and changes
      • 26.334 Damage tolerance data for STCs and other changes and repairs to those changes approved before 1 September 2003
      • 26.370 Continuing airworthiness tasks and aircraft maintenance programme
        • CS 26.370 Continuing airworthiness tasks and aircraft maintenance programme — Operators and organisations responsible for maintenance programmes for large aeroplanes under Part-M
          • GM1 26.370(a)(ii) Means to address the adverse effects of repairs and modifications
    • SUBPART C —  HELICOPTERS
      • 26.400 Fire extinguishers
        • CS 26.400 Fire extinguishers
          • GM1 26.400(b) Fire extinguishers
      • 26.410 Emergency controls operated underwater
        • CS 26.410 Emergency controls operated underwater
      • 26.415 Underwater emergency exits
        • CS 26.415 Underwater emergency exits
          • GM1 26.415(b) Underwater emergency exits
          • GM1 26.415(c) Underwater emergency exits
          • GM1 26.415(d) Underwater emergency exits
      • 26.420 Emergency equipment for flight over water
        • CS 26.420 Flight over water emergency equipment
          • GM1 26.420(a) Flight over water emergency equipment
          • GM1 26.420(c) Flight over water emergency equipment
      • 26.425 Provision of substantiated sea conditions
        • CS 26.425 Provision of substantiated sea conditions
      • 26.430 Resistance of an emergency flotation system to damage
        • CS 26.430 Emergency flotation system resistance to damage
      • 26.431 Determination of the robustness of emergency flotation system designs
        • CS 26.431 Determination of the robustness of emergency flotation system designs
          • GM1 26.431 Determination of the robustness of emergency flotation system designs
      • 26.435 Automatic deployment of an emergency flotation system
        • CS 26.435 Automatic deployment of an emergency flotation system
          • GM1 26.435(b) Automatic deployment of an emergency flotation system
    • Appendix 1
      • List of aeroplane models not subject to certain provisions of Annex I (Part-26)
    • Appendix F to CS-26
      • Part l — Test Criteria and Procedures
      • Part II — Flammability of Seat Cushions
      • Part III — Test Method to Determine Flame Penetration Resistance of Cargo Compartment Liners
      • Part IV — Test Method to Determine the Heat Release Rate From Cabin Materials Exposed to Radiant Heat
      • Part V — Test Method to Determine the Smoke Emission Characteristics of Cabin Materials

Annex I (Part-26)

ADDITIONAL AIRWORTHINESS SPECIFICATIONS FOR OPERATIONS

PreviousNext