Skip to main content
Home
EASA

You are here

  • Home
  • Document Library
  • Publications
  • Technical publications - Easy Access Rules
  • Easy Access Rules for Acceptable Means of Compliance for Airworthiness of Products, Parts and Applia...

Easy Access Rules for Acceptable Means of Compliance for Airworthiness of Products, Parts and Appliances (AMC-20)

Amendment 23
23 Jun 2023
Last updated date
23 June 2023
Feedback
More info and download PDF

Easy Access Rules for Acceptable Means of Compliance for Airworthiness of Products, Parts and Appliances (AMC-20)

Amendment 23

Filters

Table of contents

  • Disclaimer
  • Note from the editor
  • Acceptable means of compliance
  • Guidance material
  • Incorporated amendments
  • Preamble
  • SUBPART A — GENERAL
    • SUBPART A — GENERAL
    • AMC 20-1A
      • AMC 20-1A Certification of Aircraft Propulsion Systems Equipped with Electronic Control Systems
    • AMC 20-2B
      • AMC 20-2B Certification of Essential Auxiliary Power Units (APUs) Equipped with Electronic Controls
        • Appendix to AMC 20-2B
    • AMC 20-3B
      • AMC 20-3B Certification of Engines Equipped with Electronic Engine Control Systems
    • AMC 20-6B
      • AMC 20-6B Extended-range operation with two-engine aeroplanes ETOPS certification and operation
        • Appendix 1 to AMC 20-6B – Propulsion system reliability assessment
        • Appendix 2 to AMC 20-6B – Aircraft systems reliability assessment
        • Appendix 3 to AMC 20-6B – Operational limitations
        • Appendix 4 to AMC 20-6B – Flight preparation and in-flight procedures
        • Appendix 5 to AMC 20-6B – ETOPS en-route alternate aerodromes
        • Appendix 6 to AMC 20-6B – ETOPS training programme
        • Appendix 7 to AMC 20-6B – Typical ETOPS operations manual supplement
        • Appendix 8 to AMC 20-6B – Continuing airworthiness considerations
    • AMC 20-8A
      • AMC 20-8A Occurrence reporting
    • AMC 20-9
      • AMC 20-9 Acceptable Means of Compliance for the Approval of Departure Clearance via Data Communications over ACARS
        • Appendix 1 to AMC 20-9 PDC versus DCL: A Comparison
        • Appendix 2 to AMC 20-9 Common Terms
    • AMC 20-10
      • AMC 20-10 Acceptable Means of Compliance for the Approval of Digital ATIS via Data Link over ACARS
        • Appendix 1 to AMC 20-10 Common Terms
    • AMC 20-15
      • AMC 20-15 Airworthiness Certification Considerations for the Airborne Collision Avoidance System (ACAS II) with optional Hybrid Surveillance
        • Appendix 1 to AMC 20-15 – ACAS II/Mode S Transponder Ground Testing Precautions
        • Appendix 2 to AMC 20-15 – List of Acronyms
    • AMC 20-19
      • AMC 20-19 Passenger Service and In-Flight Entertainment (IFE) Systems
    • AMC 20-20B
      • AMC 20-20B Continuing structural integrity programme
        • Appendix 1 to AMC 20-20B Guidelines for the development of a supplementary structural inspection programme
        • Appendix 2 to AMC 20-20B Guidelines for the development of a programme to preclude the occurrence of widespread fatigue damage
          • Annex 1 to Appendix 2 to AMC 20-20B Full-scale fatigue test evidence
          • Annex 2 to Appendix 2 to AMC 20-20B Example of how to establish an LOV
        • Appendix 3 to AMC 20-20B Guidelines for establishing instructions for continued airworthiness of structural repairs and modifications
          • Annex 1 to Appendix 3 to AMC 20-20B Approval process for new repairs
          • Annex 2 to Appendix 3 to AMC 20-20B Assessment of existing repairs
          • Annex 3 to Appendix 3 to AMC 20-20B Repairs and modifications to removable structural components
          • Annex 4 to Appendix 3 to AMC 20-20B Service bulletin review process
          • Annex 5 to Appendix 3 to AMC 20-20B List of major changes and STCs that may adversely affect fatigue-critical structure
          • Annex 6 to Appendix 3 to AMC 20-20B Background to the need for damage-tolerance-based inspection programmes for repairs
        • Appendix 4 to AMC 20-20B Guidelines for the development of a corrosion prevention control programme
        • Appendix 5 to AMC 20-20B — Guidelines for ensuring the validity of continuing structural integrity programmes
    • AMC 20-21
      • AMC 20-21 Programme to enhance aeroplane Electrical Wiring Interconnection System (EWIS) maintenance
        • Appendix A to AMC 20-21 Enhanced Zonal Analysis Logic Diagram and Steps
        • Appendix B to AMC 20-21 Examples of Typical EZAP Worksheets
        • Appendix C to AMC 20-21 Determination if a major change to an aircraft should be specifically subjected to an EZAP
        • Appendix D to AMC 20-21
        • Appendix E to AMC 20-21 Causes of Wire Degradation
    • AMC 20-22
      • AMC 20-22 Aeroplane Electrical Wiring Interconnection System Training Programme
        • Appendix A to AMC 20-22 – EWIS Minimum Initial Training Programme for Group 1 and 2
        • Appendix B to AMC 20-22 – EWIS Minimum Initial Training Programme for Group 3 through 8
        • Appendix C to AMC 20-22 – Curriculum and Lessons Plan
    • AMC 20-23
      • AMC 20-23 Development of Electrical Standard Wiring Practices documentation
        • Appendix A: Groups, Major Topics, Standardised Sequence and Description of Minimum Content
    • AMC 20-24
      • AMC 20-24 Certification Considerations for the Enhanced ATS in Non-Radar Areas using ADS-B Surveillance (ADS-B-NRA) Application via 1090 MHZ Extended Squitter.
        • Appendix 1 to AMC 20-24
        • Appendix 2 to AMC 20-24
        • Appendix 3 to AMC 20-24
        • Appendix 4 to AMC 20-24
    • AMC 20-25A
      • AMC 20-25A Airworthiness considerations for Electronic Flight Bags (EFBs)
    • AMC 20-29
      • AMC 20-29 Composite Aircraft Structure
        • Appendix 1 to AMC 20-29 – Applicable CSs and Relevant Guidance
        • Appendix 2 to AMC 20-29 – Definitions
        • Appendix 3 to AMC 20-29 – Change of Composite Material and/or Process
    • AMC 20-42
      • AMC 20-42 Airworthiness information security risk assessment
    • AMC 20-115D
      • AMC 20-115D Airborne Software Development Assurance Using EUROCAE ED-12 and RTCA DO-178
        • GM1 to AMC 20-115D — Software change impact analyses (CIAs)
        • GM2 to AMC 20-115D — Clarification of data coupling and control coupling
        • GM3 to AMC 20-115D — Error-handling at design level
    • AMC 20-128A
      • AMC 20-128A Design Considerations for Minimizing Hazards Caused by Uncontained Turbine Engine and Auxiliary Power Unit Rotor Failure
        • Appendix 1 to AMC 20-128A User’s Manual
    • AMC 20-136A
      • AMC 20-136A Aircraft Electrical and Electronic System Lightning Protection
        • Appendix 1 to AMC 20-136A — Definitions and acronyms
        • Appendix 2 to AMC 20-136A — Examples of lightning safety assessment considerations — Level A systems on large aeroplanes
    • AMC 20-152A
      • AMC 20-152A Development Assurance for Airborne Electronic Hardware (AEH)
    • AMC 20-158A
      • AMC 20-158A Aircraft electrical and electronic system high-intensity radiated fields (HIRF) protection
        • Appendix 1 to AMC 20-158A — Definitions and acronyms
        • Appendix 2 to AMC 20-158A — Generic transfer functions and attenuation
        • Appendix 3 to AMC 20-158A — Examples of HIRF safety assessment considerations — Level A systems on large aeroplanes
    • AMC 20-170
      • AMC 20-170 Integrated modular avionics (IMA)
    • AMC 20-189
      • AMC 20-189 The Management of Open Problem Reports (OPRs)
        • GM1 to AMC 20-189 — PR management
        • GM2 to AMC 20-189 — OPR classification
        • GM3 to AMC 20-189 — Additional GM related to the ‘Significant’ classification
    • AMC 20-193
      • AMC 20-193 Use of multi-core processors
  • SUBPART B — LIST OF AMC-20 ITEMS
    • SUBPART B — LIST OF AMC-20 ITEMS

SUBPART A — GENERAL

SUBPART A — GENERAL

ED Decision 2020/010/R

PreviousNext