Appendix I to Part-CAMO — Continuing Airworthiness Management Organisation Certificate – EASA Form 14
Regulation (EU) 2022/410
|
[MEMBER STATE (*)] A Member of the European Union (**) CONTINUING AIRWORTHINESS MANAGEMENT ORGANISATION CERTIFICATE Reference: [MEMBER STATE CODE *].CAMO.XXXX (Reference(s): include here the AOC approval(s) AOC XX.XXXX) Pursuant to Regulation (EU) 2018/1139 of the European Parliament and of the Council of 4 July 2018 on common rules in the field of civil aviation and establishing a European Union Aviation Safety Agency and to Commission Regulation (EU) No 1321/2014, and subject to the conditions specified below, the [COMPETENT AUTHORITY OF THE MEMBER STATE*] hereby certifies: [COMPANY NAME AND ADDRESS] as a continuing airworthiness management organisation in compliance with Section A of Annex Vc (Part‑CAMO) to Commission Regulation (EU) No 1321/2014. CONDITIONS: 1. This certificate is limited to the scope specified in the scope of work section of the approved continuing airworthiness management exposition (CAME) as referred to in Section A of Annex Vc (Part-CAMO) to Commission Regulation (EU) No 1321/2014. 2. This certificate requires compliance with the procedures specified in the CAME approved in accordance with Annex Vc (Part-CAMO) to Commission Regulation (EU) No 1321/2014. 3. This certificate is valid whilst the approved continuing airworthiness management organisation remains in compliance with Annex I (Part-M), Annex Vb (Part-ML) and Annex Vc (Part-CAMO) to Commission Regulation (EU) No 1321/2014. 4. Where the continuing airworthiness management organisation subcontracts under its management system the service of an (several) organisation(s), this certificate remains valid subject to such organisation(s) fulfilling the applicable contractual obligations. 5. Subject to compliance with the conditions 1 to 4 above, this certificate shall remain valid for an unlimited duration unless the certificate has previously been surrendered, superseded, suspended or revoked. If this form is also used for air operator certificate (AOC) holders (air carriers licensed in accordance with Regulation (EC) No 1008/2008), the AOC number, or if in accordance with point M.A.201(ea) of Annex I (Part‑M) to Commission Regulation (EU) No 1321/2014, the AOC numbers, shall be added to the reference, in addition to the standard number, and condition 5 shall be replaced with the following additional conditions: 6. This certificate does not constitute an authorisation to operate the types of aircraft referred to in condition 1. The authorisation to operate the aircraft is the AOC. 7. Termination, suspension or revocation of the AOC of an air carrier licensed in accordance with Regulation (EC) No 1008/2008 automatically invalidates the present certificate in relation to the aircraft registrations specified in the AOC except when the CAMO is contracted in accordance with point M.A.201(ea) of Annex I (Part-M) to Commission Regulation (EU) No 1321/2014, unless otherwise explicitly stated by the competent authority. 8. Subject to compliance with the previous conditions, this certificate shall remain valid for an unlimited duration unless the certificate has previously been surrendered, superseded, suspended or revoked. Date of original issue: ........................................................................................................................................ Signed: ............................................................................................................................................................... Date of this revision: ................................................................Revision No: …………………………………………………. For the competent authority: [COMPETENT AUTHORITY OF THE MEMBER STATE (*)] Page … of … |
|
Page 2 of 2 CONTINUING AIRWORTHINESS MANAGEMENT ORGANISATION TERMS OF APPROVAL
Reference: [MEMBER STATE CODE *].CAMO.XXXX (Reference(s) AOC XX.XXXX)
Organisation: [COMPANY NAME AND ADDRESS]
|
|||||
|
|
Aircraft type/series/group |
Airworthiness review authorised |
Permits to fly authorised |
Subcontracted organisations |
|
|
|
|
[YES/NO] *** |
[YES/NO] *** |
|
|
|
|
|
[YES/NO] *** |
[YES/NO] *** |
|
|
|
|
|
[YES/NO] *** |
[YES/NO] *** |
|
|
|
|
|
[YES/NO] *** |
[YES/NO] *** |
|
|
|
The terms of approval are limited to the scope of work contained in the approved CAME section………… CAME reference: ……………………………………………………………………………………………………………………………………. Date of original issue: …………………………………….. Signed: …………………………………………………………… Date of this revision: …………………………………………………………… Revision No: …………………………………………….
For the Competent Authority: [COMPETENT AUTHORITY OF THE MEMBER STATE *]
|
|||||
EASA Form 14 Issue 6
(*) or 'EASA', if EASA is the competent authority
(**) delete for non-EU Member State or EASA
(***) delete as appropriate if the organisation is not approved.
AMC1 to Appendix I to Part-CAMO — Continuing Airworthiness Management Organisation Certificate
ED Decision 2020/002/R
EASA FORM 14
The following fields on page 2 ‘CONTINUING AIRWORTHINESS MANAGEMENT ORGANISATION - TERMS OF APPROVAL’ of the EASA Form 14 certificate should be completed as follows:
Date of original issue: It refers to the date of the original issue of the continuing airworthiness management exposition.
Date of this revision: It refers to the date of the last revision of the continuing airworthiness management exposition affecting the content of the certificate. Changes to the continuing airworthiness management exposition which do not affect the content of the certificate do not require the reissuance of the certificate.
Revision No: It refers to the revision number of the last revision of the continuing airworthiness management exposition affecting the content of the certificate. Changes to the continuing airworthiness management exposition which do not affect the content of the certificate do not require the reissuance of the certificate.