Terms of Reference (ToR) and Rulemaking Group Composition (RMG)

Helicopter emergency medical services performance and public interest site

Extension of the EASA system to safety regulation of Air Traffic Management (ATM) and Air Navigation Services (ANS)

Installation of parts and appliances that are released without an EASA Form 1 or equivalent.

Additional airworthiness specifications for operations: Thermal/acoustic insulation material

Helicopter H-V limitation

New training methods or new teaching technologies (Part-66/Part-147)

Review of Part-M for General Aviation

Technical requirements and operational procedures for meteorological services.

Technical requirements and operational procedures for aeronautical information services (AIS) and aeronautical information management (AIM)

Development of AMC/GM for safety key performance indicators (ATM performance IR) for reference period 2

Technical requirements and operational procedures for the provision of data for airspace users for the purpose of air navigation

All-weather operations

Evidence-based and competency-based training

Easier access of General Aviation (GA) pilots to instrument flight rules (IFR) flying

Correction of editorial errors contained in Part-145 and the associated AMC

Single/Multiple Releases

Control of suppliers of components, parts and appliances used in maintenance

Control of contracted maintenance personnel

Amendment to Decision 2003/19/RM (AMC to Part 145) to adapt them to the process of granting Part­145 approvals to maintenance organisations located outside the territories of the Member States.

Correction of editorial errors contained in Part-147 and the associated AMC

Records of instructors, examiners and assessors

CERTIFICATION OF AIRCRAFT PROPULSION SYSTEMS EQUIPPED WITH ELECTRONIC ENGINE CONTROL SYSTEMS

Airworthiness and Operational Approval of Electronic Flight Bags (EFB)

Airworthiness and operational approval for on-board equipment related to RNP-RNAV approach operations

Airworthiness and operational approval for on-board equipment related to ATM Programmes (e.g. EATMP)

Ageing Aircraft Structures

Miscellaneous improvement to AMC­20

Aircraft certification and operator approval considerations for data communication supporting Air Traffic Services

Approval requirements for Air-Ground Data Link and Surveillance systems in support of Interoperability requirements

Approval of Navigation Database Providers

Approved organisations certificate number

Cleaning up of Part 21 and AMC/GM

Airworthiness Directives (ADs)

Improvement of GM 21A.101

Ambiguity between AMC/GM and Part 21 in respect of eligibility for Subpart F and G for manufacturers of raw material

Permit to Fly / Restricted Certificates of Airworthiness

Restricted Certificates of Airworthiness

Permit to Fly: privilege for Continuing Airworthiness Management Organisations

Subpart J, Design Organisation Approval (DOA)

Subpart J, The Future of Design Organisation Approval (DOA) - Recognition of Suppliers, Contractors and Test Houses

Repairs and design changes to ETSO

Possibility for “exemption” from the applicable airworthiness code and “elect to comply” for TCs, STCs and changes to TCs

Elaboration and adoption in the Community framework, of additional airworthiness specifications for a given type of aircraft and type of operation

Additional airworthiness specifications for operations – Transfer of JAR-26 provisions into the EU framework

Part 21 Other party supplier control

Replacement parts

Permit to Fly: Issue by the Agency/DOA privileges to approve flight conditions

FATIGUE SUBSTANTIATION

Cockpit safety

Stall Speed Greater Than 113 km/h (61 knots)

OPERATION ON CONTAMINATED RUNWAYS

FUEL TANK STRUCTURAL INTEGRITY/FUEL TANK ACCESS COVER

FLIGHT LOAD VALIDATION

FLIGHT GUIDANCE SYSTEMS

FLIGHT CREW ERROR/FLIGHT CREW PERFORMANCE CONSIDERATIONS IN THE FLIGHT DECK CERTIFICATION PROCESS

THERMAL/ACOUSTIC INSULATION BLANKETS

MISCELLANEOUS POWERPLANT

Flight in Icing Conditions and Flight Test Guide

Miscellaneous - Structure

Casting Factors

Doors and Mechanical Systems

Symbolic exit signs and Revised standards for cargo compartments (“D to C”)

APU Installation and Fuel Tank Safety

Engine & APU Failure Loads and Sustained Engine Wind Milling

Activation of ice protection system

Protection from debris impacts

Specific risk and standardised criteria for conducting aeroplane-level safety assessments of critical systems

Avionics

Human Centred Design

Passenger Emergency Exits, emergency features and escape routes - Harmonisation with FAA

TYPE III EXITS (access and ease of operation)

CLASS B/F CARGO COMPARTMENTS

ACCESS THROUGH BULKHEADS

Overhead bin safety precautions

Fuel System Low Level Indication/Fuel Exhaustion

Fuel tank flammability reduction

Security related design standards

Large Aeroplane Certification Specifications in Supercooled Large Drop, Mixed phase, and Ice Crystal Icing Conditions

Incorporation of generic SC and AMC CRIs in CS-25

Additional airworthiness specifications for operations: Type III Emergency exit access and ease of operation

Additional airworthiness specifications for operations: Seat crashworthiness improvement on Large Aeroplanes - Dynamic testing 16g

Additional airworthiness specifications for operations: Fire hazard in Class D cargo compartments

Fuel tank flammability reduction of already certificated large aeroplanes

PERFORMANCE & HANDLING QUALITIES

DAMAGE TOLERANCE & FATIGUE EVALUATION

Yawing Conditions

AC Revision

Vibration Health Monitoring Specification and Update to Miscellaneous Guidance (MG) 15.

AMC Revision 2012 (External Loads Sub-group)

Certification Specifications for Airships and Balloons

Certification Specifications for Free Gas Balloons and Tethered Gas Balloons.

Correction of editorial errors contained in Part-66 and the associated AMC

Integrate into Part-66 draft of 66.A.55

Remove appendix 1 to AMC 66

Time limit for demonstrating compliance with knowledge and experience requirements

Privileges of B1 and B2 aircraft maintenance licences

Question databank

Re-issuance of the aircraft maintenance licence

Type and group ratings